uso del ghost en un ambiente de spanning cds

I came up with this guide to make it as easy as possible to deploy ghost images from CDs. I prefer to use unicasting or multicasting whenever possible but there are times when a CD set is needed. I have received a lot of help on these forums and wanted to give a little back.

This guide will help you to take a large ghost image and span it on to CDs with the first CD being bootable. Also the first CD contains ghost.exe and autoloads ghosts to deploy the image.

I am currently using Symantec Ghost 8 Corporate but this process should work for most versions of Ghost.


SPANNING YOUR IMAGE
===================
1. Open up the ghost image to deploy in ghost explorer
2. Select view | options | set a span split to fit your cd media
3. Select File | compile and save your image

MAKING YOUR FLOPPY IMAGE
========================
1. Start with a Windows ME boot disk and keep only these files

AUTOEXEC.BAT
CD1.SYS
CONFIG.SYS
MOUSE.COM (get this from disk 1 of a ghost boot floppy)
MOUSE.INI (get this from disk 1 of a ghost boot floppy)
MSCDEX.EXE
IO.SYS
MSDOS.SYS
COMMAND.COM

2. Change your autoexec.bat to match the following:
CODE
@echo off

MSCDEX.EXE /D:tomato /L:R
SET TZ=GHO+08:00
prompt $p$g
MOUSE.COM
for %%i in (r:\*.gho) do set image=%%i
echo Loading...
\ghost\ghost.exe -clone,mode=load,src=%image%,dst=1 -rb


NOTE: If you do not want to auto deploy the image then remove
the parameters after ghost.exe

3. Change your config.sys to match the following:
CODE
FILES=30
BUFFERS=20
DEVICE=cd1.SYS /D:tomato
LASTDRIVE=Z


4. Make an image of your floppy using WinImage
a. Open WinImage then click on Disk | Read Disk
b. Click on Image | Change Format and select 2.88
c. Drag and Drop the Ghost folder including ghost.exe from disk 2 of a ghost boot disk set
d. save your image as a .ima image

MAKING CD1 YOUR BOOTABLE CD
===========================
1. Open Ahead Nero Burning ROM and choose bootable CD "CD-ROM (Boot)"
2. From the boot tab put a check in image file and browse to your .ima file
3. Put a check in "enable expert settings" and change emulation to 2.88
4. Click on new
5. Drag and drop the first *.gho image from your spanned ghost image
6. Burn your CD

MAKING CD2-CDx GHOST CDs
========================
1. Open Ahead Nero Burning ROM and choose "CD-ROM (ISO)"
2. Click on new
3. Drag and drop the next *.ghs image from your spanned ghost image
4. Burn your CD

DONE

Just take your CD set now and put in CD1 and let it rip. Ghost will ask you for
the next CD when it is ready for it.

Dennis

conversión de un archivo nrg a un archivo iso

A veces dejamos la imagen de un disco en formato de Nero NRG, para manipularlo con cualquierotro programa mas universal se puede convertir a formato ISO mediante el programa

ULTRA ISO

Ultra ISO permite tambien ver el contenido y extrarlo totalmente desde el archivo NRG:

PosteRazor: Tu póster gigante en casa

Este programa gratuito y de código libre, creado por Alessandro Portale, nos permite convertir archivos y prepararlos para imprimir en cualquier tamaño que queramos. Siempre y cuando la tinta y paciencia para pegar las partes nos alcance, el tamaño no tiene límites. La idea es usar una impresora normal para crear tu propio póster gigante.

El proceso es bastante rápido, te explicamos paso por paso:
Seleccionamos la fotografía o gráfico que queremos imprimir
Elegimos el tamaño de papel y configuramos los márgenes
Seleccionamos cuanto queremos que los bordes se sobrepongan (para facilitar el re-armado)
Elegimos el tamaño final del póster que queramos
Salvamos el archivo .PDF para imprimir dónde queramos

Seguro que ya estás pensando imprimir el póster de tu modelo favorita (o favorito) de varios metros para pegar en la pared de tu cuarto. Si te decides a hacerlo, cuéntanos como te fue.






Enlaces Sitio Oficial: PosteRazor en Sourceforge.net

http://posterazor.sourceforge.net/index.php?page=download

Protected Music Converter 1.0.0.10

Protected Music Converter 1.0.0.10

Protected Music Converter is a software which allows you easily convert your protected (or unprotected) music files to most frequently used unprotected formats (WMA, MP3, OGG). Thus you can listen your music on your iPod, burn them to CD, upload them on your cell phone, use them on whatever device you want, even if it doesn't support protected content playback. Installation procedure is very fast and easy, it means no unsigned 3rd party drivers (causing Blue Screens Of Death here and there) installation, no weird sound system detection screens, just usual file copy procedure and that's it. Interface is straight and easy to use, without flashy colours or graphics. All you need to do is to add your protected files to batch list, select desirable output format and press start button. Supported input formats are: M4P, MP4, AAC, WMA, MP3, WAV, OGG, AU audio files, AIFF.

Main features of Protected Music Converter:

- Straight and easy to use interface
You can easily convert your music file with just few mouse clicks: add your music files to batch list, select appropriate output format and press start button. You can create custom profiles for output format settings or use build-in standard profiles, Drag'n'Drop, Copy/Paste from MS Explorer are also included.
- Fast and easy installation procedure
It means no additional drivers are installed , no extra sound system detection screens, just usual file copy procedure.
- Protected music files conversion
All protected music files playable by both Windows Media Player and QuickTime Player can be converted to unprotected MP3, WMA, OGG. This is not protection removal though, software just plays protected files and places resulting sound into unprotected music file.
- Wide range of supported input formats
All music files with filename extensions listed below are supported as valid input files for Protected Music Converter: ulw, au, sd2, amr, gsm, adts, caf, mpeg, mpg, m1s, m1v, m1a, m75, m15, mp2, mpm, mpv, mpa, snd, 3gp, 3gpp, m4a, m4v, swa, amc, 3g2, 3gp2, m4b, m4p, drv-ms, aif, aiff, aifc, asf, asx, wm, wmx, wmd, wmz, mp3, wax, wma, ogg, wav, aac
- Batch conversion support
If you have massive amount of files you want to convert this software is exactly what you need to speed up the process.
- Most recent audio codecs support
Protected Music Converter uses most recent audio codecs, it internally supports WMA and OGG formats, for MP3 encoding it uses LAME encoder 3.97